Auxiliary Disciplines

  

Destructive methods.

The laboratory tests our products with modern equipment: OES, ED-XRF, WD-XRF, AAS, Electrolysis, Preparation facilities, Microscopes image processing equipment ( grain size test) , Drawing machine, Hardness test (Brinell, Vickers, Rockwell ball/cone). Impact-testing machine, Dezincification tests, Ammonia stress tests, Crushing press, various etching methods.

The production is supported by professional employees Research & Development, Tool shop, Technical Service and KAM.

  

Research & Development.

The various technical disciplines guarantee the process and the technical developments and improvements in the process.
Our laboratory is equipped with modern analysis facilities, both for chemical and mechanical investigations:
OES, ED-XRF, WD- XRF, AAS, Electrolyse, Preparation facilities, Microscopes image processing equipment (grain size test) , Drawing machine (xxt), Hardness test (Brinell, Vickers, Rockwell ball/cone). Impact-testing machine, Dezincification tests, Ammonia stress tests, crushing press, various etching methods.

  

   

  

Technical Service.

Our technical service has facilities in order to maintain the machine park quickly and efficiently and solve all occurring failures quickly and professionally.

  

Tool shop.

A large range of hollow dies and wire drawing dies are manufactured and reconditioned by the company itself.

 

   


Home  |  Contact  |  Sitemap  | 
LDM B.V.
Lipsstraat 44, 5151 RP Drunen, The Netherlands
PO Box 42 , 5150 AA Drunen, The Netherlands
Tel.: +31 416 389 911 fax: +31 416 378 655
Email: sales.ldm@ldmbrass.com
Go up